New Products

This is the HUDY "Star Box" 1/8 off road starter box. The HUDY Star-Box is the world's lowest, most ultra-compact, lightweight professional starter...

This is an Outlaw Kart Steering Wheel Hook! Dont know where to put your steering wheel after a race that isnt the muddy ground? You need one of our...

This is Outlaw Kart 1-1/4" Axel Wheel Spacer set! This is a complete spacer set to suit all standard QRC style rear axel's with 1-1/4" outer diamet...

This is the bearing kit by Avid RC for the Mugen MTC2. This is a full bearing kit including every bearing for the car. You can always make a custom...

Product Overview Designed to be color coordinated (e.g. Red uses all red wires and sheath) for charging 2S battery packs through 12ga wire. Inclu...

This is a replacement Team Associated 46 Tooth RC8B3.1E/B3.2E Plastic Spur Gear. 

Team Associated B6 "Gullwing" Front Arms. These are the replacement gullwing front arms for the RC10 B6D, but when combined with the gullwing front...

This is a pack of three replacement Team Associated RC8B3.1 Differential Gaskets for use with the RC8B3.1 and RC8B3.1e. 

The Team Associated RC8B3 Factory Team Brass Chassis Weight is custom designed to fit the Team Associated RC8B3.1 and B3.1e buggies.Features: Mac...

This is a replacement Team Associated Shock Rebuild Kit, intended for use with the big bore 1/8 scale shocks used on the RC8B3.1/2 nitro buggy. Thi...

The Team Associated Octalock 48P Spur Gear, launched with the RC10B74.1 buggy, introduces the latest spur gear design from Team Associated. In addi...

The Team Associated Octalock 48P Spur Gear, launched with the RC10B74.1 buggy, introduces the latest spur gear design from Team Associated. In addi...

This is a Gear Pin Set to suit Hitec HS-1005SGT Large Scale Servo's.  It includes the two pins, short solid and long stepped that hold the main gea...

This is a motor assembly to suit Hitec HS-1005SGT Large Scale Servo's.  It includes the motor and gear drive

This is a First Gear to suit Hitec HS-1005SGT Large Scale Servo's.  It includes the Plastic first gear

This is a full gear set to suit Hitec HS-1000/1005SGT Large Scale Servo's.  It includes the 3 main metal gears, plastic first gear, bearing, shims ...

This Reedy Zappers HV SG4 4S 115C LiPo Battery with 5mm Bullets incorporates state-of-the-art LiPo chemistry with advancements in construction tha...

Team Associated RC8T3/B3.2 30.5mm Ti-Nitride Front Shock Shafts. Package includes two replacement 30.5mm ti-nitride front shock shafts.

Team Associated B6 Factory Team Aluminum Steering Rack. This is the optional aluminum rack for the RC10 B6 and B6D buggies. Package includes one s...

This is a replacement Team Associated 76mm Center Universal, intended for use with the RC8B3 Nitro Buggy. This package does not include a set screw...

This is a replacement Team Associated 106mm Center Universal Driveshaft, intended for use with the RC8B3 Nitro Buggy. This driveshaft is assembled ...

This is a pack of four Team Associated Aluminum RC8B3.2 Shock Bushings. 

Team Associated RC8B3 Factory Team Engine Mount Blocks. These engine mounting blocks are compatible with the RC8 B3 and T3 models and must be combi...

Team Associated RC8B3.2 Factory Team Engine Mount Base. This engine mounting base is compatible with the RC8 B3 and T3 models and must be combined ...

Team Associated RC8 B3.2 Body Posts & Bumper Set. Package includes replacement front bumper, front body post and rear body post compatible with...

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a replacement Team Associated 46 Tooth RC8B3.1/B3.2 Spur Gear. 

Team Associated RC8 B3.2 Aluminum LRC Narrow Arm Mount "C". Tune your buggy or truggy to have increased rear grip and reduced turn-in with these L...

Team Associated RC8 B3.2 Aluminum LRC Narrow Arm Mount "D". Tune your buggy or truggy to have increased rear grip and reduced turn-in with these L...

This is a pack of two optional XRAY 1.5mm Lexan Rear Wings. These wings are made from 1.5mm thick lexan for additional durability and strength. 

The Proline RC10T6.2/Losi 22T 4.0 Axis ST 1/10 Stadium Truck Body. Featuring a low profile design that gives sharp lines throughout making for an a...

JConcepts' "HF2 SCT" Low-Profile Short Course Truck Body was designed for mid-motor SCT trucks with elements that take SCT tuning to the next level...

This is a set of two JConcepts Double Dee's 2.2 1/10th Truck Tires, in Green compound. The JConcepts Double Dee’s 1/10 Truck tire is perfect for a ...

This set of JConcepts Sprinter Short Course Tires are Off-Road and Dirt-Oval racing ready. Designed to to provide an option between the the Double ...

This set of JConcepts Sprinter Short Course Tires are Off-Road and Dirt-Oval racing ready. Designed to to provide an option between the the Double ...

iM RC Digital Infrared Thermometer -50~600C Laser Temperature Meter Gun Digital LCD  Emissivity:0.1~100 ajustableResponse spectrum :8~14umLaser :1m...

Payce RC Large Body Clips, perfect for 1/8 size.   Chrome plated steel body clips are perfect for 1/8 scale onroad and offroad cars, come in a pack...

VISION, a new reference for the 1/8 buggy Brushless class The VISION project stems from the desire to offer to the Off-road enthusiasts a high-pe...

T Works 1/8 Airflow Buggy Wing (Black) T-Work's has come up with a 1/8 Buggy Wing which features a wickerbill design that allows greater air flow a...