Xray

This is a pack of two optional XRAY 2.0mm Lexan Rear Wings. These wings are made from 2.0mm thick lexan for additional durability and strength. 

This is a set of XRAY Aluminum Set Up Shims, and are intended for use with the XRAY T1, and T2 family of vehicles. This is the ultimate assortment ...

This is a set of replacement XRAY Heavy Duty Composite Body Posts, and are intended for use with the XRAY X12, or just about any 1/12 pan car.

XRAY 64 Pitch Composite Spur Gear are compatible with the XRAY XII and X10 pan cars and are available in a variety of tooth count options to fine t...

XRAY 64 Pitch Composite Spur Gear are compatible with the XRAY XII and X10 pan cars and are available in a variety of tooth count options to fine t...

XRAY 64 Pitch Composite Spur Gear are compatible with the XRAY XII and X10 pan cars and are available in a variety of tooth count options to fine t...

**Pre Order** Brand new Xray T4 2020 Aluminum chassis. Full redesign of the T4 platform with a mid mount motor configuration. Check otu the full re...

This is a set of two replacement front body mounts for the XRAY T4 1/10th scale touring car. Set includes redesigned 6mm thick body posts and all o...

This is a XRAY 20 Tooth Fixed Lay Shaft Pulley, and is intended for use with the XRAY T4. This precision molded 20T lay shaft pulley includes a com...

This is a replacement XRAY 2x10mm Drive Shaft Pin with Flat Spot, and is intended for use with the XRAY T4.

This is a replacement XRAY 3x189mm High-Performance Kevlar Rear Drive Belt, and is intended for use with the XRAY T4. This specially modified, high...

This is a replacement XRAY 3x513mm High-Performance Kevlar Front Drive Belt, and is intended for use with the XRAY T2R Pro and T2 009. This special...

This is a pack of two replacement XRAY 4.9mm Ball Ends, and are intended for use with the XRAY XB4/T4. These ball ends feature 10mm long threads. 

This is a set of eight replacement ball joints for the XRAY T4 1/10th scale touring car. Molded composite 4.9mm ball joints, open on both sides, fo...

This is an optional XRAY ECS Right Side 0° Composite Hard Rubber-Spec C-Hub.

This is an optional XRAY ECS Right Side 0° Composite Hard Rubber-Spec C-Hub.

This is a replacement XRAY Composite Gear Differential Case & Cover Set, and is intended for use with the XRAY T4 family of 1/10 touring cars e...

This is a XRAY Hard Composite Foam-Spec Steering Block, and is intended for use with the T2 family of vehicles. This hard composite molded steering...

This is a XRAY Hard Composite, Foam-Spec, 0° Outboard Toe-In Rear Upright, and is intended for use with the XRAY T2 family of vehicles. This rear u...

This is a replacement drive shaft coupling for the XRAY T4 1/10th scale touring car. Hudy Spring Steel™ drive shaft coupling, works in front and re...

This is a replacement XRAY Eccentric Bushing Set, and is intended for use with the XRAY XB4/T4.

This is a set of four XRAY 3.5mm Replacement Plastic Drive Pin Clips, and are only intended for use with the XRAY Multi-Diff, and T2 008 Aluminum B...

This is a replacement XRAY X-Stiff Composite Servo Saver Set, and is intended for use with the XRAY T3'11, T3’12, XII, X12 and X10 Link vehicles. T...

This is the XRAY X12 2019 US Spec 1/12 Scale Pan Car Kit. Based on the ultra-successful X12 platform, XRAY proudly presents the X12 which incorpora...