RC8T3.1 Parts

This is a pack of two replacement Team Associated "Hard" 4-Shoe Aluminum Clutch Shoes. 

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch. 

Team Associated IFMAR 1/8 Buggy Wing. This is the updated, IFMAR legal wing for Team Associated B3 and T3 1/8 scale vehicles. Package includes one ...

This is a set of ten replacement HUDY 3x14mm driveshaft pins. Extend the life of your driveshafts and outdrives, by replacing the pins with these h...

This is a replacement Team Associated 4-Shoe Clutch Shoe Pin Set.  Includes:  (4) Clutch Shoe Pins, 4 Shoe Clutch (6) Washers, 5x8x0.2 (4) Washers...

This is a replacement Team Associated RC8B3.1 Differential O-Ring Set.  Features:  (6) Differential Outdrive O-Ring (12) Differential Planet Gear ...

Team Associated RC8T3/B3.2 42.5mm Ti-Nitride Rear Shock Shafts. Package includes two replacement 42.5mm long ti-nitride rear shock shafts.

Product Overview These wire grippers are used to organize your wires going from your speedy to battery but they have endless possibilities. Detai...

This is a set of four replacement header gaskets for the Team Associated off-road buggy.

Payce RC Large Body Clips, perfect for 1/8 size.   Chrome plated steel body clips are perfect for 1/8 scale onroad and offroad cars, come in a pack...

T Works 1/8 Airflow Buggy Wing (Black) T-Work's has come up with a 1/8 Buggy Wing which features a wickerbill design that allows greater air flow a...

Payce RC self locking wheel nuts and are intended for use with all 1/8 scale off road vehicles. These come as a set of 4 in black.

This is a replacement Team Associated Differential Case for the RC8B3.1 and RC8B3.1e. 

Muchmoore Stainless Steel Pro Body Clips, Large Perfect for 1/8 cars

This is a pack of two replacement Team Associated 4-Shoe Composite Clutch Shoes.

This is a replacement Team Associated 46 Tooth RC8B3.1E/B3.2E Plastic Spur Gear. 

This is a replacement Team Associated Wing Mount. Like the Hot Bodies D815, this is a 1-piece wing mount which will be very lightweight. 

This is a replacement Team Associated Hinge Pin Set, for use with the RC8B3 and RC8B3e 1/8 Buggy. This set includes 6 hinge pins.

Team Associated Factory Team 16mm Big Bore Tapered Shock Pistons feature a tapered profile and angled holes to help improve handling through bumps ...

This is a set of ten replacement HUDY 3x12mm driveshaft pins. Extend the life of your driveshafts and outdrives, by replacing the pins with these h...

This is a replacement Team Associated Arm Mount Insert Set, intended for use with the Team Associated RC8B3 Nitro Buggy. 

This is the HB Racing 1/8 Rear Plastic Wing in Black color. This wing has no mounting holes and requires you to create your own. One wickerbill and...

Team Associated Factory Team 16mm Big Bore Tapered Shock Pistons feature a tapered profile and angled holes to help improve handling through bumps ...

This is a replacement Team Associated Front Anti-Roll Bar Set, intended for use with the RC8B3 Nitro Buggy. This set includes three front bars in t...

This is a pack of four replacement Team Associated RC8 B3 Shock Mount Pins. These pins are used to secure the lower shock mount to the suspension arm.

This is an optional Team Associated 20mm Shock Rod End and Spring Cup Set. 20mm shock rod ends, spring cups, and collars allow a wider variety of 2...

This is a replacement Team Associated 46 Tooth RC8B3.1/B3.2 Spur Gear. 

This is a pack of four replacement Team Associated Pillow Ball Nuts, intended for use with the Team Associated RC8B3 Nitro Buggy. These nuts are ma...

This is a pack of ten replacement 3x24mm cap screws for the Team Associated off-road buggy. Used on the shock tower, shock bolts.

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a pack of ten Team Associated 5.5x0.5mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of ...

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a pack of three replacement Team Associated V2 Differential Case Gaskets. These gaskets are used in the front, center and rear differential...

This is a pack of four replacement Team Associated Aluminum Engine Mount Washers, intended for use with the RC8B3 Nitro Buggy. These washers are in...

This is a replacement Team Associated RC8B3.1 4-Shoe Flywheel Nut. 

The Team Associated Aluminum HRC Arm Mount "A" with High Roll Center positions the pivot point 1mm higher for increased ground clearance and greate...

This is a replacement Team Associated Rear Anti-Roll Bar Set, intended for use with the RC8B3 Nitro Buggy. This set includes three front bars in to...

The Team Associated Factory Team 4-Shoe Adjustable Clutch System is a patent-pending clutch system that gives racers the ability to adjust the tens...

This is a replacement Team Associated Front Anti-Roll Bar Set. This set includes three front bars.  Effects of Front Roll Bar Adjustment  Stiffn...

This is a pack of two blue JConcepts "Finnisher" 1/8th Buggy Wing Buttons. In the 1/8th off-road world a securely fastened wing is critical during ...

This is a pack of two black JConcepts "Finnisher" 1/8th Buggy Wing Buttons. In the 1/8th off-road world a securely fastened wing is critical during...

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a replacement Team Associated Steering Block Set, intended for use with the RC8B3 Nitro Buggy. This set includes one left and one right sid...

This is a replacement Team Associated Air Filter Foam Element. This element requires is dry and requires air filter oil. 

The Team Associated Factory Team RC8B3 CVA Rebuild Kit is a replacement for RC8B3 and RC8B3e vehicles that have been equipped with the optional Fac...

Team Associated RC8T3/B3.2 30.5mm Ti-Nitride Front Shock Shafts. Package includes two replacement 30.5mm ti-nitride front shock shafts.

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...