New Products

Vision RC Silicon Wire Black 12AWG 1M

Vision RC Silicon Wire Red 12AWG 1M

This is HUDY Ultra Double-Sided Tape, 3M branded.

Ultimate solder for the RC professional is 1.0mm thick and 60/40 Sn/Pb. Contains 3.3% flux core. The 3m length of solder is nicely rolled into a ti...

Vision RC Turnbuckle Wrench 7.0mm, fully machined aluminum

Vision RC Turnbuckle Wrench 5.5mm, fully machined aluminum

Vision RC Turnbuckle Wrench 5.0mm, fully machined aluminum

This is the Hudy Stiff Bristle, Small Size Cleaning Brush. These brushes from HUDY will help you to keep your cars clean with style and flair. It d...

This is the Hudy Stiff Bristle, Large Size Cleaning Brush. These brushes from HUDY will help you to keep your cars clean with style and flair. It d...

This unique tool in the line of HUDY Professional Tools is the perfect tools for removing and installing caster clips such as those used on XRAY an...

This is a set of ten replacement HUDY 3x12mm driveshaft pins. Extend the life of your driveshafts and outdrives, by replacing the pins with these h...

This is a set of ten replacement HUDY 3x14mm driveshaft pins. Extend the life of your driveshafts and outdrives, by replacing the pins with these h...

Simple tool designed to optimize chassis balance. Place the balancing tool pieces on a flat, level surface. Place the chassis onto the points of th...

The Hudy 20-30mm Ride Height Gauge is a high-quality, adjustable, and easy to use ride height gauge, perfect for measuring ride height on 1/10 and ...

Hudy Chassis ride height gauge for 1/10 nitro and electric touring cars.Features: Allows ultra-fine and very precise adjustment of front/rear ride...

Silicone Fuel Line For 1/8 - Per Meter - Blue - Thick walled

Silicone Fuel Line For 1/8 - Per Meter - ORANGE - Thick walled

This is Large 500cc capacity fuel bottle features a smooth, simple design that is easy to squeeze, yet easily returns to its original shape. The lo...

This is a replacement Team Associated Chassis, intended for use with the Associated SC10 1/10 Scale short course race truck.

This is a pack of two replacement Team Associated 4-Shoe Composite Clutch Shoes.

This is a pack of two replacement Team Associated "Hard" 4-Shoe Aluminum Clutch Shoes. 

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a replacement Team Associated 4-Shoe Clutch Shoe Pin Set.  Includes:  (4) Clutch Shoe Pins, 4 Shoe Clutch (6) Washers, 5x8x0.2 (4) Washers...

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch. 

1/8 Inch diff balls, ceramic, 12 per pack

This is a 16 ounce bottle of Bittydesign Liquid Mask. Bittydesign Liquid Mask will save you time and help you produce a better finished product. Th...

This is a Mugen 2.8mm rear anti-roll bar, and is intended for use with the Mugen MBX8 and MBX8T 1/8 scale vehicles. Effects of Rear Roll Bar Adjus...

Team Associated B6 Ballcups. These are the replacement ball cups for the RC10 B6 and B6D buggies. Package includes twelve standard ball cups and tw...

This is a replacement Team Associated CVA Rebuild Kit. This package includes two CVA couplers and two CVA pins. 

The JConcepts Associated RC8B3.1 "Silencer" Body was designed to accommodate the RC8B.1 chassis side-guards and body mount positioning. The Silence...

This is the JConcepts S15 1/8 Nitro Buggy Body in Clear Lexan, for use with the HB Racing D819; as well as the D817 V2. The S15 blends performance ...

This is the JConcepts S15 1/8 Nitro Buggy Body in Clear Lexan, for use with the Mugen MBX8 1/8 Nitro Buggy. The S15 packs a lot of performance into...

This is the standard weight JConcepts "P2K" 1/10 2WD Buggy Body for the Team Associated B6.1 and B6.1D 2WD Buggies. JConcepts has a rich history in...

JConcepts B6/B64 "Aero" S-Type Rear Wing is developed and manufactured by JConcepts Inc. The S-type wing includes options not yet seen before on a ...

IM RC 2000mah AA Rechargeable Glow Ignitor

This is a replacement Team Associated B6.1/B6.1D Inner Slipper Hub. 

This is a replacement Team Associated B6.1/B6.1D Outer Slipper Hub. 

Team Associated B6.1/B6.1D Standup Gearbox. This is the replacement standup type gearbox. 

5x8x0.3 Shim, pack of 10

3x4.9x0.3 Shim, pack of 10

Arrowma 48 Pitch Spur gears, fantastic for 1/10 touring cars.

AM-410993-BG Allen Wrench Set 1.5, 2.0, 2.5 & 3.0 X 100mm - 4-Teilig. Black GoldenIncludedAM-410116-BG Allen Wrench 1.5 X 100mm Black GoldenAM-...

Performa Racing Graphene Lipo Shorty 5500mah 15.2V 120C (P1-PA931). Developed for 1/8 Buggy racing, the Performa Graphene HV Lipo Shorty is the ult...

This is a pair of Crime Fighter 2.2” 1:10 4WD Buggy Front Tires. Pro-Line is bringing 1:8th Buggy front tire technology down to size for 1:10th Bug...

For racers who need enhanced steering from their BMR-12-equipped 1:12 On-Road car, a new tuning option is now available: the BMR-12.1 On the new hi...

Vision RC Multi charge cable. 4mm bullets on charger end. Battery end includes EC3, Traxxas, Deans, Futaba, JST, Tamiya and JST-H