Products

JConcepts, the leader in 1/10th off-road wing development, brings a simple yet effective test and tune option to their Aero S-type wing. The Aero S...

JConcepts' "HF2 SCT" Low-Profile Short Course Truck Body was designed for mid-motor SCT trucks with elements that take SCT tuning to the next level...

This is a pack of four black JConcepts "Satellite" Tire Glue Bands. JConcepts has reinvented the tire mounting rubber band. A uniquely molded desig...

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a pack of two optional XRAY 1.5mm Lexan Rear Wings. These wings are made from 1.5mm thick lexan for additional durability and strength. 

This is Avid Rc 1/8" Silicon Nitride (Si3N4) ceramic balls are 30% lighter than steel and 40% stronger. Each ball is over 1000X more round than the...

Team Associated IFMAR 1/8 Buggy Wing. This is the updated, IFMAR legal wing for Team Associated B3 and T3 1/8 scale vehicles. Package includes one ...

1/8 Inch diff balls, ceramic, 12 per pack

Motiv 100a 1200w 12.8v power supply, 240vac Input 240v AC Output 12.8V 1200W 100mp 3x Pair of gold plated low resistance 4mm bullet plugs install...

Product Overview The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this ...

This is a pack of two optional Team Associated 12mm Front Shock Springs. V1 Springs are Linear V2 Springs are progressive V2 springs come standard ...

This is a set of two replacement white front wheels for the Team Associated B44 4WD buggy. These rims feature nylon construction which makes them t...

This is a set of two replacement rear wheels for the Team Associated B44 4WD buggy. These rims feature nylon construction which makes them tough, y...

This is a pack of two Team Associated Hex Dish 1/10 Stadium Truck Wheels, and are intended for use with the Associated RC10T5M 1/10 stadium truck. ...

This is a pack of two optional Team Associated 12mm Rear Shock Springs. V1 Springs are Linear V2 Springs are progressive V2 springs come standard i...

This is a pack of two optional Team Associated 12x23mm FT FOX Kashima Coated V2 Buggy Front Shock Bodies. 

This is a pack of two optional Team Associated 12x24mm FT FOX Kashima Coated V2 Buggy Front Shock Bodies. 

This is a pack of two optional Team Associated 13mm Rear Shock Springs  

The Avid 14x25.4x6 Ceramic Engine Bearing offers the maximum performance and reliability to your racing engine at an unbeatable price. The bearin...

The Avid 14x25.8x6 Ceramic Engine Bearing offers the maximum performance and reliability to your racing engine at an unbeatable price. The bearin...

Product Overview The Revolution Series bearings are a low friction bearing with several options to help satisfy anyone's desire. What makes this ...

1UP RACING Blue O-Ring grease is the perfect answer for the serious racer looking to get the most performance from their car! With it’s superior ab...

Unlike anything on the market! This anti-wear grease has a synthetic base lubricant that clings tenaciously to metal surfaces for increased life an...

The new 1up Racing Heatsink Bullet Plug Grips make plugging your battery in and out a breeze! They simply slide over your 1up LowPro bullet plugs (...

Includes all the industry leading lubricants you need for your chassis! The oiler bottles are now 8mL and leak free! Now with a super cool black pi...

1up Red is for those seeking extreme performance and long-lasting protection for their CV joints and Universals. Its slick surface repels dirt and ...

Absima 2.0mm Allen Wrench

Absima 2.0mm Ball Allen Wrench

Absima 2.5mm Ball Allen Wrench

This is a Team Associated 25° Caster Block Set. These front caster blocks are set at a 25 degree angle. 

Vision RC 2s lipo balance charge lead. Comes with 5mm bullet connectors for battery end and 4mm bullet connectors for charger end. 60cm total lead ...

iM RC Reciever and Transmitter Charge lead set Used for any 2s battery, no need to remove out of the car or device. Used for any 2s batteries No ...

Pro-Line 2WD Pomona Drag Spec 2.2" Front Drag Racing Wheels are high-performance and perfectly styled drag wheels for no-prep SC drag racing. The...

The slim front wheels are designed for use with all popular carpet and AstroTurf surface tires. It features the same offset as the popular ASC9691 ...

Absima 3.0mm Flat head Screwdriver, perfect as a tuning screwdriver

Trinity 3/32 Ceramic Diff Balls, pack of 14 Perfect for 1/10 ball diffs

The Hudy 30mm Brushless Cooling Fan is an extremely reliable fan that features solder tabs for quick & easy cable replacement. This fan has a b...

This is a set of two JConcepts 3D's Short Course Tires in Green Compound, pre-mounted on black Hazard wheels intended for use with the Associated S...

This is a set of ten replacement HUDY 3x14mm driveshaft pins. Extend the life of your driveshafts and outdrives, by replacing the pins with these h...

This is a pack of ten replacement 3x24mm cap screws for the Team Associated off-road buggy. Used on the shock tower, shock bolts.

This is a pair of Pro-Line 4-Rib 2.2" Off road Buggy Front Tires. Pro-Line's ultimate 4-Rib front tire provides the best possible steering on all t...

This is a pack of two replacement Team Associated 4-Shoe Composite Clutch Shoes.

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch. 

The Hudy 40mm Brushless Cooling Fan is an extremely reliable fan that features solder tabs for quick & easy cable replacement. This fan has a b...

This Reedy Zappers HV SG4 4S 115C LiPo Battery with 5mm Bullets incorporates state-of-the-art LiPo chemistry with advancements in construction tha...

Abisma 500ml Fuel bottle with aluminium filler and cap for easy fueling of nitro cars.